Please VERIFY your blade size and center hole size BEFORE ordering!

**No returns on used blades**

Blade Specifications
Length: 20 1/2”
Width: 2.5”
Center Hole: 15/16”
Thickness: .250”

A. Measure Blade Length

B. Measure Blade Width

C. Measure the Center Hole

X-Blade Adapter Users: Exmark machines with the SPLINE require adding longer bolts to get adequate threads; 2 1/2” long, 1/2” fine thread, grade 8 available below. Exmark with the HEXAGON blade washer require a different X-Blade kit found on the X-Blade page under Exmark brand.

*DOES NOT FIT THE 60” TRITON DECK – THOSE REQUIRE A 20 3/4” LENGTH*

Ballard Products has brought you a line of new line of blades in both regular lift RAZOR and mulching design RIPPER blade made to exact OEM specifications for optimum performance. These hardened steel blades are tested at a Rockwell 45 rating for longer life and stay sharp technology. All blades are statically balanced and are coated with a silver powder coat finish. Will fit most commercial brands and sizes as seen in our fitment guide. Most blades sizes are also compatible with our X-Blade Dual Adapter Kits. 

• Regular lift RAZOR blade, RIPPER mulching blades and HI-RISE high lift blades in many sizes for most commercial mowers and some residential models
• Hi-Rise blades are unlike anything on the market with a 1.5” tall fin with a bend at the end to increase air flow and velocity of the clippings out from under the deck
• Longer cutting edge than most factory blades and others on the market
• Rockwell rated 45 hardened steel for longer life and stay sharp technology
• Statically balanced
• Silver powder coat finish

*High lift or our Hi-Rise blades not recommended in the X-Blade brackets. These are heavier and create more resistance, and on some machines will create excess grass blowout from the front of the deck*